Tower Generator
Java & BedrockNewDesign a whole round tower at once. Set the diameter and height, pick compact or comfortable stairs and a roof, and get the walls, the spiral staircase inside and the roof on top, already lined up. You get one material list for everything, a 3D view you can walk up, a layer-by-layer guide and a single .litematic / .schem / .nbt file. Each part can also be opened in its own generator to fine-tune.
Tower
Inside: 9 blocks across.
Ground floor to the top of the wall · 32 blocks tall with the roof.
The floor is as thick as the walls.
Staircase
16 steps per turn with deep two-wedge treads · 9 wide inside the walls · 7 blocks of headroom. The first step starts on the north side, turning clockwise.
Stair material
SpruceStairs for the steps, top slabs for the flat part of deep treads.
Roof
Roof material
Deepslate TileStairs and slabs of this material.
Walls
Stone BricksUsed for the preview colours, material list, schematics and commands.
Centre column
Stone BricksThe stairs wind round it, full height.
Layer view
Build guide · Y 0
Each row lists the runs of blocks from west to east and the gaps between them. Rows run north (−z) to south (+z). Click a row to highlight it.
- 5
- 7
- 9
- 11
- 11
- 11
- 11
- 11
- 9
- 7
- 5
Layers
32 totalMaterials
- Stone Bricks782
- Deepslate Tiles137
- Deepslate Tile Stairs136
- Spruce Slab86
- Spruce Stairs57
- Deepslate Tile Slab1
Export
Pick the version you play. Newer versions load files made for older ones, but an older game places nothing from a newer file (no error).
//schem load tower-11-h20-cone //paste
Download the .schem below, put it in plugins/WorldEdit/schematics (or config/worldedit/schematics) and paste it standing where the bottom-centre should go.
How it works
The tower is built from three of the other shape generators. The walls come from the cylinder generator (hollow, with a floor as thick as the walls). The staircase comes from the spiral staircase generator. The roof comes from the roof generator. Nothing is approximated: each part is exactly what its own tool would build.
The parts share one centre. The staircase gets the largest radius whose steps fit inside the walls without cutting into them, and starts on top of the floor. The roof uses the tower's diameter plus the overhang. Its layer level with the top wall layer sits on the wall, the same rule the roof generator tells you when you build it by hand.
Compact stairs use 8 steps per turn. Comfortable stairs use 16 steps per turn with deep two-wedge treads. Both climb 8 blocks per turn, which leaves 7 blocks of headroom under the turn above. A 2-high doorway is cut through the south wall below the first full turn, and 1×2 window slits on all four sides every 6 blocks.
Walk up the stairs in the 3D view, step through the layers or export the whole tower. The “Fine-tune a part” links open the walls, staircase or roof in their own generators with the same sizes, for options like railings, landings, trim, beams or a chimney.
Under the hood
- Staircase radius
- largest ro with the 2·ro + 1 step circle inside the walls (≈ (d − 2·t − 1) / 2)
- Staircase height
- wall height − floor thickness (= wall thickness)
- Roof width
- diameter + 2 · overhang, roof wall layer level with the top wall layer
- Headroom
- steps per turn ÷ tread depth − 1 = 7 blocks (both styles)
FAQ
How do I build a tower in Minecraft?
Build the round wall first, layer by layer, using the layer view (the floor is the first layer). Then build the centre column and the stairs from the bottom up, one wedge at a time. Finish with the roof, starting from its overhang ring. Or download the .litematic or .schem and paste the whole tower at once.
How wide should a tower with a spiral staircase be?
At least 7 blocks across for a 1-block wall and a tight 5-wide staircase. 11 to 15 is comfortable, with room for a column and a 2–4 block wide flight. Above 21 the staircase gets long — consider landings and floors (open the staircase on its own to add landings).
Compact or comfortable stairs?
Compact stairs have 8 steps per turn: short, steep flights, fine for small towers. Comfortable stairs have 16 steps per turn with two-wedge treads, so every step has a flat part to stand on. Both rise 8 blocks per turn and leave 7 blocks of headroom.
Can I change just the roof or the stairs?
Yes. Use “Fine-tune a part” to open the walls, staircase or roof in its own generator with the same sizes. There you can add railings, landings, roof trim, beams and more, then export that part on its own.
Does it work in Bedrock Edition?
The layer guide, material list and Bedrock commands export work for Bedrock. The .litematic, .schem and .nbt files are for Java Edition.
Related tools
Cylinder, Tube & Cone Generator
Minecraft cylinder and cone generator: round or elliptical tubes, cones and step pyramids, hollow or solid, with layer guides, 3D preview and schematics.ShapesSpiral Staircase Generator
Minecraft spiral staircase generator with real stairs and slabs: any radius and height, centre column, railings, landings, 3D preview and schematic export.ShapesRoof Generator
Minecraft roof generator: gable, hip, pyramid, cone, dome and barn roofs from real stairs and slabs, any pitch and overhang, 3D preview and schematics.ShapesSphere, Dome & Ellipsoid Generator
Minecraft spheres, domes and ellipsoids up to 256 blocks with layer-by-layer blueprints, a 3D preview, per-layer block counts and .litematic/.schem export.ShapesCircle, Ellipse & Star Generator
Minecraft circle generator: pixel-perfect circles, ellipses, stars and arcs up to 512 blocks, with a row-by-row build guide, block counts and schematics.ShapesWall Pattern & Gradient Block Mixer
Mix 2–8 Minecraft blocks into textured walls: dithered gradients, random mixes, noise, bricks and stripes, with exact block counts and schematic export.Pixel & Map Art