Spiral Staircase Generator
Java & BedrockNewDesign a spiral staircase for a tower, lighthouse, mineshaft or wizard's keep. Set the outer and inner radius, the height and how many steps make a full turn, choose stairs (1 block per step) or slabs (½ block), the turning direction and where the first step starts, then add a centre column, a railing or a round wall and landings. Every stair has its real facing, so the exported schematic is walkable straight away.
Size & steps
Steps reach 9 blocks across.
Column 3 blocks across · steps 3 long.
16 steps · 1 turn · 16 blocks per turn.
More steps per turn = a gentler climb and more headroom.
One wedge per step — the steepest, most compact climb.
Direction
Bearing from the centre: north (0° = north, 90° = east).
0 = no landings.
Step material
OakStairs for the steps (and top slabs for the flat tread when a step is wider than one block). Every material with stairs and slabs.
Centre column
Stone BricksFills the inner radius, full height.
Outer edge
Add a lip, a railing (posts at walking height that connect like fences) or a full-height round wall — the tower around the stairs.
Layer view
Build guide · Y 0
Each row lists the runs of blocks from west to east and the gaps between them. Rows run north (−z) to south (+z). Click a row to highlight it.
- 2
- 2
- 1
- 3
- 3
- 3
Layers
16 totalMaterials
- Stone Bricks144
- Oak Stairs44
- Oak Slab16
Export
Pick the version you play. Newer versions load files made for older ones, but an older game places nothing from a newer file (no error).
//schem load spiral-staircase-oak-r4-1-h16-16spt //paste
WorldEdit has no staircase command — download the .schem below, put it in plugins/WorldEdit/schematics (or config/worldedit/schematics) and paste it standing where the bottom-centre should go.
How it works
The steps fill a ring between the inner and the outer radius, using the same pixel-perfect circle as the circle generator. Each cell belongs to the wedge its compass bearing falls in: with 16 steps per turn every wedge is 22.5° wide, starting at the bearing you choose and running clockwise or anticlockwise.
Step k is one block (or half a block) higher than step k − 1. With 1-block rise, the cells you step onto first are stair blocks facing the way you walk — the tangent of the circle rounded to north, east, south or west — and any cells further into the same wide wedge become top slabs, a flat tread at the same height. With ½-block rise every step is a slab, bottom and top halves alternating.
Where the facing turns from one direction to the next, the stairs join into inner or outer corners exactly as Minecraft does it, so what you paste is what the game would show after a block update. Landings add a flat quarter turn after every N turns; the generator measures the headroom over every step and warns when it drops under 2 blocks.
Build it from the bottom: step through the layers (←/→ keys), read each row in the build guide — it lists the stair facing for every run of blocks — and tick blocks off in the builder checklist. Arrows on the blueprint show which way to look while placing each stair. Or export .litematic, .schem, .nbt or a .mcfunction and paste the whole thing.
Under the hood
- Wedge of a cell
- wedge = ⌊((bearing − start) · (cw ? 1 : −1) mod 360) / (360 / steps per turn)⌋
- Walking surface of step k
- y(k) = (k + 1) · rise (rise = 1 for stairs, ½ for slabs)
- Stair facing
- tangent(cw) = (cos θ, sin θ) in (x, z) → nearest of N / E / S / W
- Headroom
- ≈ steps per turn × rise − 1 (needs ≥ 2 blocks)
- Stair state
- oak_stairs[facing=east,half=bottom,shape=straight] — facing = the way you walk up
FAQ
How do I build a spiral staircase in Minecraft?
Pick the outer radius (3–5 for a tower), the height and about 4 × the radius in steps per turn. Start with the bottom layer of the blueprint: place each stair looking the way its arrow points, then go up layer by layer. Add the centre column as you climb. The exported .litematic or .schem pastes the finished staircase in one go.
Which way should the stairs face?
A stair's facing is its tall back side — the direction you walk to go up. In Minecraft you place a stair facing the way you are looking, so look along the arrow on the blueprint (towards the next, higher step) when you place it. The generator picks north, east, south or west from the direction of travel round the circle.
How many steps per turn should a spiral staircase have?
Enough for headroom: the step one full turn above you must be at least 2 blocks over your head, so with full-block stairs you need at least 4 steps per turn and with slabs at least 6. For a comfortable, round-looking staircase use about 4 × the outer radius (12–16 for a 7- or 9-wide staircase). The tool warns when headroom drops under 2.
Stairs or slabs — what's the difference?
With 1-block rise each step is a stair block and you climb one block per step — compact and classic. With ½-block rise the steps are slabs alternating bottom and top, so the climb is smoother and gentler but twice as many steps are needed for the same height.
Does it work in Bedrock Edition?
The layer blueprint, build guide and material list work in both editions — stair facing (north, east, south, west) means the same thing in Bedrock. The “Bedrock commands” export writes an .mcfunction with Bedrock block names and states (weirdo_direction and upside_down_bit for stairs, vertical_half for slabs) — put it in a behavior pack and run /function. The .litematic, .schem and .nbt files are Java Edition only.
Can I add a railing or put the staircase inside a tower?
Yes. Railing places fence, wall, bars or pane posts at walking height beside every outer step and connects them like the game does. Wall builds a full-height round wall around the steps — combine it with the cylinder generator (same diameter) for the tower and the roof generator for a cone roof on top.
Related tools
Tower Generator
Minecraft tower generator: round walls, a spiral staircase and a cone, dome or battlement roof in one build, with a material list, 3D view and schematic.ShapesRoof Generator
Minecraft roof generator: gable, hip, pyramid, cone, dome and barn roofs from real stairs and slabs, any pitch and overhang, 3D preview and schematics.ShapesCylinder, Tube & Cone Generator
Minecraft cylinder and cone generator: round or elliptical tubes, cones and step pyramids, hollow or solid, with layer guides, 3D preview and schematics.ShapesCircle, Ellipse & Star Generator
Minecraft circle generator: pixel-perfect circles, ellipses, stars and arcs up to 512 blocks, with a row-by-row build guide, block counts and schematics.ShapesSphere, Dome & Ellipsoid Generator
Minecraft spheres, domes and ellipsoids up to 256 blocks with layer-by-layer blueprints, a 3D preview, per-layer block counts and .litematic/.schem export.ShapesTorus, Ring & Arch Generator
Minecraft torus generator for donuts, rings and arches — horizontal or upright, hollow or solid — with layer guides, a 3D preview and schematic export.ShapesBlock Palette Generator & Color Matcher
Find the Minecraft blocks closest to any colour, build block gradients, pull a palette from an image or use 20+ curated themes, with survival filters.Pixel & Map Art