Minecraft Sphere Generator
Java & BedrockBuild spheres, domes and ellipsoids layer by layer. Set the diameter (or X, Y and Z separately), choose hollow or solid and a shell thickness, then step through every layer with a 2D blueprint, a 3D preview, per-layer block counts, a builder checklist and exports for Litematica, WorldEdit and structure blocks. Building an igloo? Start from the Igloo preset and swap the block for snow, packed ice or calcite.
Shape & size
Fill
Measured inward along each axis. The shell is always sealed — no gaps from outside.
Cut it open to see inside, or to build a half dome against a wall.
Block
Block of QuartzUsed for the preview colours, material list, schematics and commands.
Smoothing
Layer view
Build guide · Y 0
Each row lists the runs of blocks from west to east and the gaps between them. Rows run north (−z) to south (+z). Click a row to highlight it.
- 3
- 5
- 7
- 7
- 7
- 5
- 3
Layers
21 totalMaterials
- Block of Quartz1,082
Export
Pick the version you play. Newer versions load files made for older ones, but an older game places nothing from a newer file (no error).
//hsphere quartz_block 10
Sphere layers for common sizes
Each layer of a sphere is a circle. These tables list the layers from the bottom up to the middle; the top half repeats them in reverse. Width is the layer's diameter in blocks; the counts are for a hollow sphere with a 1-block shell and for a solid one. Numbers come from the generator above.
7-block sphere
| Layer | Width | Hollow | Solid |
|---|---|---|---|
| 1 | 3 | 9 | 9 |
| 2 | 5 | 16 | 25 |
| 3 | 7 | 16 | 37 |
| 4 | 7 | 16 | 37 |
11-block sphere
| Layer | Width | Hollow | Solid |
|---|---|---|---|
| 1 | 5 | 21 | 21 |
| 2 | 7 | 24 | 45 |
| 3 | 9 | 24 | 69 |
| 4 | 11 | 28 | 89 |
| 5 | 11 | 28 | 97 |
| 6 | 11 | 28 | 97 |
15-block sphere
| Layer | Width | Hollow | Solid |
|---|---|---|---|
| 1 | 5 | 21 | 21 |
| 2 | 9 | 48 | 69 |
| 3 | 11 | 28 | 97 |
| 4 | 13 | 32 | 129 |
| 5 | 13 | 36 | 145 |
| 6 | 15 | 40 | 169 |
| 7 | 15 | 40 | 177 |
| 8 | 15 | 40 | 177 |
21-block sphere
| Layer | Width | Hollow | Solid |
|---|---|---|---|
| 1 | 7 | 37 | 37 |
| 2 | 11 | 60 | 97 |
| 3 | 13 | 48 | 145 |
| 4 | 15 | 48 | 193 |
| 5 | 17 | 48 | 241 |
| 6 | 19 | 52 | 277 |
| 7 | 19 | 52 | 293 |
| 8 | 21 | 56 | 325 |
| 9 | 21 | 56 | 341 |
| 10 | 21 | 56 | 349 |
| 11 | 21 | 56 | 349 |
31-block sphere
| Layer | Width | Hollow | Solid |
|---|---|---|---|
| 1 | 7 | 45 | 45 |
| 2 | 13 | 92 | 137 |
| 3 | 17 | 84 | 221 |
| 4 | 19 | 72 | 293 |
| 5 | 21 | 80 | 373 |
| 6 | 23 | 64 | 437 |
| 7 | 25 | 68 | 497 |
| 8 | 27 | 72 | 553 |
| 9 | 27 | 76 | 593 |
| 10 | 29 | 80 | 641 |
| 11 | 29 | 80 | 673 |
| 12 | 29 | 84 | 697 |
| 13 | 31 | 84 | 725 |
| 14 | 31 | 84 | 749 |
| 15 | 31 | 84 | 749 |
| 16 | 31 | 84 | 749 |
How it works
A block belongs to the shape when its centre lies inside the ellipsoid. The test uses exact integer maths, so spheres are perfectly symmetric on all three axes and, for odd sizes, identical to WorldEdit's //sphere. Ellipsoids simply use a different size on each axis — eggs, blimps, squashed planets.
Hollow shapes keep every block that has one of its six faces open to the outside. That shell is watertight: there is no gap you could see or walk through from outside. A thicker shell of t blocks removes the interior of the same shape shrunk by t − 1, so the wall is t blocks deep along each axis.
Domes come in two styles. "Half" is the top half of an ellipsoid: the base always has the full width, and the height can be the hemisphere (half the width), flatter, or taller. "Cap" cuts the top layers off a full sphere — a shallow cap has a narrower base, and a cap taller than half the sphere gives a ball sitting in the ground. Hollow domes are open underneath unless you add a floor.
Build bottom-up with the layer view: the slider, the previous/next buttons or the ←/→ keys move through the layers, the layer below is drawn faintly so you can line things up, and every layer has its own row-by-row build guide and block count. In 3D, "cut at layer" hides everything above the layer you're on. Huge shapes are computed in typed arrays and refreshed after you stop dragging, so the page never freezes.
Smooth with stairs & slabs (off by default) rounds the outer steps: where a layer steps in, its edge block becomes a stair facing up the slope, or a slab on wide flat steps and the top cap. The lower half of a sphere gets upside-down stairs. The stairs match your block (stone bricks → stone brick stairs; blocks with no stairs fall back to the same material or the closest colour, or you pick one). The block count, materials list and every export use the real stair and slab states.
Under the hood
- Inside test (ellipsoid a × b × c)
- (2x+1−a)²·b²c² + (2y+1−b)²·a²c² + (2z+1−c)²·a²b² ≤ a²b²c²
- Hollow shell
- solid − interior(solid shrunk by t − 1) (interior = all 6 neighbours inside)
- Hemisphere height
- ⌈d / 2⌉ layers (includes the widest layer)
- Rough block counts
- solid ≈ π·d³/6 · hollow ≈ π·d² (1 thick)
- WorldEdit
- //sphere <block> r · //hsphere <block> r · //sphere <block> rx,ry,rz (r = (d − 1) / 2)
FAQ
How do I build a sphere in Minecraft?
Build it as a stack of circles. Start at the bottom layer, place the circle shown for that layer, then move up one layer at a time with the next button or the → key. The faint ghost of the layer below helps you line each new ring up, and the checklist remembers which blocks you've placed.
How do I make a dome for a roof?
Pick Dome and set the width to the width of your tower or building. Height 0 (auto) gives a perfect hemisphere; lower the height for a flatter roof or raise it for an onion-style dome. Hollow domes are open underneath so they sit straight onto your walls.
How many blocks does a sphere need?
The total updates live with stacks and shulker boxes, and every layer has its own count. A hollow sphere 31 wide needs 2,382 blocks; a solid one about 15,600 — solid spheres grow with the cube of the diameter, so prefer hollow for anything big.
Hollow or solid — which should I choose?
Hollow for anything you live in or look at from outside: domes, biodomes, planets. Solid for small decorations, or when you want to carve the inside yourself. A thicker shell (2–3 blocks) makes room for lighting and windows without holes.
Can I import the sphere with Litematica or WorldEdit?
Yes: download .litematic for Litematica, .schem for WorldEdit (//schem load then //paste), .nbt for structure blocks or a .mcfunction of /fill commands. The export panel also shows the matching //sphere or //hsphere command, which is exact for odd sizes.
Can I smooth the dome with stairs and slabs?
Yes — turn on "Smooth with stairs & slabs". Every outer step gets a stair facing up the slope (or a slab on wide steps and around the top), and the underside of a sphere gets upside-down stairs, all as real block states in the .litematic, .schem, .nbt and commands. A 2-thick shell smooths most evenly; on a 1-thick shell the diagonal blocks stay full so the shell never gets a gap.
How do I add a door to the igloo?
Skip one block in each of the two bottom layers, on the side you want to face. That leaves a 1-wide, 2-tall doorway; the layer view shows which block to leave out.
Related tools
Circle, Ellipse & Star Generator
Minecraft circle generator: pixel-perfect circles, ellipses, stars and arcs up to 512 blocks, with a row-by-row build guide, block counts and schematics.ShapesCylinder, Tube & Cone Generator
Minecraft cylinder and cone generator: round or elliptical tubes, cones and step pyramids, hollow or solid, with layer guides, 3D preview and schematics.ShapesTorus, Ring & Arch Generator
Minecraft torus generator for donuts, rings and arches — horizontal or upright, hollow or solid — with layer guides, a 3D preview and schematic export.ShapesBlock Palette Generator & Color Matcher
Find the Minecraft blocks closest to any colour, build block gradients, pull a palette from an image or use 20+ curated themes, with survival filters.Pixel & Map ArtImage to Pixel Art Converter
Turn any picture into Minecraft block art: pick a palette, dithering and size, touch it up, then export a schematic, commands and a material list.Pixel & Map ArtWall Pattern & Gradient Block Mixer
Mix 2–8 Minecraft blocks into textured walls: dithered gradients, random mixes, noise, bricks and stripes, with exact block counts and schematic export.Pixel & Map Art