Skip to content
ShapeCraft

Cylinder, Tube & Cone Generator

Java & Bedrock

Design towers, silos, wells, pointed roofs, volcanoes and pyramids. Set the base diameter (or an oval base), the height and an optional top diameter for a taper, choose hollow or solid with any wall thickness, then build it layer by layer with the 2D guide, the 3D preview, block counts and exports.

Shape & size

blocks
blocks
Presets

Fill

blocks

Block

Stone Bricks

Used for the preview colours, material list, schematics and commands.

Blocks
617
9×64 + 41
Size
15×15
12 tall · W × L
Layer 1/12
177
blocks in this layer

Layer view

bottomLayer 1 of 12 · Y 0 · 177 blockstop
Major lines
Draw

Build guide · Y 0

Each row lists the runs of blocks from west to east and the gaps between them. Rows run north (−z) to south (+z). Click a row to highlight it.

  1. 5
  2. 9
  3. 11
  4. 13
  5. 13
  6. 15
  7. 15
  8. 15
  9. 15
  10. 15
  11. 13
  12. 13
  13. 11
  14. 9
  15. 5

Layers

12 total
Materials for

Materials

617
blocks
10
stacks
0.4
shulkers
  • Stone Bricks617

Export

Pick the version you play. Newer versions load files made for older ones, but an older game places nothing from a newer file (no error).

WorldEdit (hollow cylinder)
//hcyl stone_bricks 7 12

//hcyl is open at both ends — add the floor with //cyl stone_bricks 7.

How it works

Every layer is a circle (or ellipse, or square for pyramids) whose diameter goes in a straight line from the base diameter at the bottom to the top diameter at the top — exact at both ends. A cylinder keeps the same diameter, a cone narrows to a single block (2×2 for even sizes), a truncated cone stops at the top diameter you choose, and a pyramid shrinks a square the same way. Flip any tapered shape upside down for funnels and hoppers.

Hollow shapes keep every block with a face open to the outside, so the walls are sealed even where a cone's slope is shallow and consecutive rings barely overlap. Thicker walls remove the inside of the same shape shrunk by the thickness. Choose whether the bottom and top are closed; a tube is open at both ends.

Use the layer view to build from the ground up: step with the slider, the buttons or the ←/→ keys, see the layer below as a ghost and follow the row-by-row guide with coordinates from the centre, from the corner or in world coordinates. Every layer's block count is listed, and the checklist remembers what you've placed.

For odd sizes, cylinders match WorldEdit's //cyl and //hcyl exactly, and a classic step pyramid (height = (width + 1) / 2, pointed top) matches //pyramid. Everything else exports to .litematic, .schem, .nbt and .mcfunction.

Smooth with stairs & slabs (cones, truncated cones and pyramids, off by default) puts a stair on every step edge facing up the slope and a slab on wide steps, so cone roofs and pyramids look sloped instead of stepped. Upside-down shapes get upside-down stairs. Straight cylinder walls are never touched. Materials, the 3D view and every export use the real block states.

Under the hood

Diameter at layer y (0 = bottom)
d(y) = d_bottom + (d_top − d_bottom) · y / (h − 1)
Round layer test
(2x+1−W)²·D_z² + (2z+1−L)²·D_x² ≤ D_x²·D_z²
Classic step pyramid
height = (base + 1) / 2 → every layer is 1 block smaller on each side
WorldEdit
//cyl <block> r [height] · //hcyl <block> rx,rz [height] · //pyramid <block> height

FAQ

How do I build a round tower in Minecraft?

Choose Cylinder, set the diameter (11–21 is a typical castle tower) and the height, and keep it hollow with a closed bottom. Build the bottom ring from the layer guide, then repeat it up the tower — every layer is identical. Add a cone or a dome on top with the roof presets.

How do I make a cone roof for a tower?

Pick Cone, set the base diameter to your tower's width plus 2 for an overhang, and a height of about 1.5–2× the width for a pointed wizard-style roof. Leave the bottom open so it sits on the walls. For a shallower roof, use a smaller height.

What is a truncated cone used for?

A truncated cone (frustum) is a cone with the tip cut off: volcanoes, mountains, lighthouse bases, cooling towers and flared tower bases. Set the base and top diameters separately; flip it upside down for funnels and bowls.

How many blocks does a cylinder need?

The total updates live together with stacks and shulker boxes. A hollow cylinder uses one ring per layer — a 15-wide ring is 40 blocks, so a 12-tall tower is 480 blocks plus the floor. Solid cylinders use the full disc every layer.

Can I make an oval tower or a rectangular pyramid?

Yes — turn on the elliptical base and set the depth separately. Cylinders and cones become oval, and pyramids get a rectangular base that tapers to a ridge or a smaller rectangle.

Can I make a smooth cone roof with stairs?

Yes — pick Cone (or Pyramid) and turn on "Smooth with stairs & slabs". Each step gets a stair facing up the slope in your block's stair material, with outer corners on pyramids, and the exports carry the exact stair states. For a full roof with overhangs and trim, the roof generator builds the whole roof from stairs.

All tools →